Smart Building & Automation
Smart building and automation solutions that connect building systems through intelligent controls, centralised monitoring, energy management and automated schedules, improving comfort, reducing energy use and streamlining operations.
One platform to monitor, control and optimise the whole building.
Cooling is the largest energy load in most UAE buildings, and much of it is wasted cooling empty spaces or fighting badly tuned controls. A building that knows who is where, and what every plant item is doing, can cut that waste without anyone noticing a difference in comfort.
We integrate HVAC, lighting, metering, lifts, generators and third-party systems into a single building management platform over open protocols. Operators get one set of graphics, one alarm list and trend data that shows exactly where energy goes.
BACnet, Modbus, KNX, DALI and MQTT, so you are not locked to one vendor.
Sub-metering and dashboards that show consumption by floor, tenant and system.
Occupancy-based HVAC and lighting that respond to real use.
Alarms and status from every system in one operator interface.
The complete smart building catalogue.
151 systems, devices and services across 10 areas. Choose an area or search for a specific technology.
Building Management Systems (BMS)
15 items- Centralized building management platforms
- Building automation systems (BAS)
- BMS supervisory software
- Operator workstations and control servers
- Building system graphics and dashboards
- Alarm monitoring and notifications
- Trend logging and historical reporting
- Automated scheduling and control
- Equipment status monitoring
- Energy and utility monitoring
- Multi-building and multi-site management
- Remote monitoring and control
- Integration with third-party building systems
- BMS graphics development and customization
- Building automation system upgrades and migration
HVAC Automation & Control
17 items- HVAC system monitoring and control
- Air handling unit (AHU) automation
- Fan coil unit (FCU) controls
- Variable air volume (VAV) control
- Chiller plant monitoring and control
- Cooling tower automation
- Pump and motor control integration
- Variable frequency drive (VFD) integration
- Duct and room temperature sensors
- Humidity sensors
- CO₂ and indoor air quality sensors
- Differential pressure monitoring
- Thermostats and smart room controllers
- HVAC scheduling and optimization
- Occupancy-based HVAC control
- Demand-controlled ventilation
- Integration with central BMS platforms
Smart Lighting Control
16 items- Automated lighting control systems
- DALI lighting control
- KNX lighting control
- Addressable lighting systems
- Centralized lighting management
- Occupancy and motion sensors
- Daylight harvesting
- Dimming and scene control
- Time-based lighting schedules
- Corridor and common area lighting control
- Office lighting automation
- Hospitality room lighting control
- Outdoor and landscape lighting control
- Parking and façade lighting control
- Emergency lighting status monitoring, where supported
- Integration with BMS and room automation
Smart Room & Hospitality Automation
15 items- Hotel guest room management systems (GRMS)
- Smart room controllers
- Intelligent thermostats
- Lighting and curtain control
- Motorized blinds and curtains
- Guest room energy management
- Key-card or occupancy-based room controls
- Do Not Disturb and Make Up Room integration
- Smart touch panels and keypads
- Centralized room status monitoring
- Guest comfort scene configuration
- Integration with property management systems
- Conference room automation
- Residential smart room control
- Executive office automation
Smart Home & Residential Automation
17 items- Smart home control systems
- KNX-based residential automation
- Lighting and dimming control
- HVAC and thermostat control
- Curtain and blind automation
- Multi-room audio integration
- Home theater integration
- Smart switches and touch panels
- Voice assistant integration
- Smart door locks and access integration
- Video door phones
- Smart energy monitoring
- Irrigation control
- Swimming pool and outdoor automation
- Centralized mobile application control
- Remote access and monitoring
- Residential security integration
Energy Management & Sustainability
18 items- Energy management systems (EMS)
- Building energy monitoring
- Smart electricity meters
- Water metering and consumption monitoring
- Thermal energy monitoring
- Power quality monitoring
- Energy dashboards and reporting
- Energy consumption benchmarking
- Demand and load management
- Peak demand monitoring
- Energy usage alerts
- HVAC energy optimization
- Lighting energy optimization
- Occupancy-based energy control
- Solar PV monitoring integration
- Battery energy storage monitoring integration
- EV charging load management integration
- Sustainability and carbon reporting integration, where supported
Smart Sensors & IoT Integration
16 items- Temperature and humidity sensors
- Occupancy and presence sensors
- Indoor air quality sensors
- CO₂ and particulate matter monitoring
- Water leak detection sensors
- Smart electricity and water meters
- Environmental monitoring
- Equipment condition monitoring
- IoT gateways and edge controllers
- Wireless sensor networks
- LoRaWAN integration
- MQTT-based integrations
- BACnet and Modbus integration
- KNX and DALI integration
- API-based third-party integration
- Cloud-based monitoring dashboards
Integrated Workplace & Space Management
12 items- Smart office automation
- Desk booking systems
- Meeting room booking integration
- Occupancy analytics
- Space utilization monitoring
- Indoor environmental quality monitoring
- Visitor management integration
- Digital signage integration
- Workplace dashboards
- Smart access control integration
- Room and resource scheduling
- Integration with enterprise collaboration platforms
Additional Building Systems Integration
14 items- Elevator and lift monitoring integration
- Generator and ATS monitoring
- UPS monitoring
- Electrical distribution monitoring
- Water tank level monitoring
- Pump room monitoring
- Fire alarm status integration, subject to approved interfaces
- Lighting and façade control
- Irrigation system monitoring
- Swimming pool plant monitoring
- Central utility plant monitoring
- Data center environmental monitoring
- Centralized facilities management dashboards
- Computerized maintenance management system (CMMS) integration
Smart Building Services
11 items- Building automation consultancy
- Control system architecture and design
- Automation sequence development
- BMS graphics and programming
- Control panel design and integration
- Sensor and actuator installation
- Third-party system integration
- Functional performance testing
- Testing, commissioning, and documentation
- Energy optimization and recommissioning
- Preventive maintenance and technical support
We list only the protocols and platforms our team and the selected manufacturers can implement on your project; final protocol selection is confirmed during design.
Design, supply, install, integrate, maintain.
The same engineers carry your smart building project from first survey to long-term support.
Survey & consult
We visit the site, review drawings and understand how people, vehicles and data move through it.
Design & approve
Shop drawings, BOQ and specifications prepared and submitted for consultant and authority approval.
Supply & install
Genuine equipment from authorised channels, installed by trained technicians to a clean, labelled standard.
Integrate & commission
Systems tested end to end, integrated, documented and handed over with as-built drawings and training.
Maintain & support
Annual maintenance contracts, remote monitoring and on-site response tied to agreed service levels.
Where we deliver smart building systems.
Designed around the building type, the people who use it and the authorities that approve it. See industries →
Shown where applicable. Final standards, protocols and manufacturers are confirmed for each project during design.
How smart building connects to everything else.
Every Burraq system is designed to share infrastructure, data and alarms with the others.
Reference projects
Case studies for this discipline will be published here with scope, installed systems and outcomes.
Can you integrate equipment from different manufacturers?
Yes. That is the core of the work. We integrate through open protocols such as BACnet, Modbus, KNX and DALI, and through documented APIs where systems offer them.
Can an existing BMS be upgraded without replacing all field devices?
Often yes. We can migrate the supervisory layer and controllers in phases while keeping sensors, valves and actuators that are still in good condition.
Do you offer smart home automation for villas?
Yes. We deliver KNX-based residential automation covering lighting, climate, curtains, audio, security, door entry and remote control from a mobile app.
How do you show energy savings?
We install metering, set a baseline, and provide dashboards and periodic reports so savings are measured rather than estimated.
Discuss your smart building project.
Share your drawings or describe the site. We will come back with a design approach, the systems we recommend and a budget estimate.